IFM VSE101 Diagnostic electronics for vibration sensors With Good Price In Stock
For the reliable vibration monitoring of machines and equipment
Condition-based maintenance thanks to monitoring of imbalance, rolling element bearing or gear state
Inputs for the simultaneous detection of up to four vibration sensors
Two switching outputs for pre-alarm and main alarm
analog inputs for monitoring further measurement variables
| Product characteristics of VSE101 | |
|---|---|
| Frequency range [Hz] | 0.1...12000 |
| Application of VSE101 | |
| Design | parameter setting via PC software VES004 |
| Application | continuous vibration monitoring |
| Electrical data of VSE101 | |
| Operating voltage tolerance [%] | 20 |
| Operating voltage [V] | 24 DC; (when using the IEPE input: 24 V + 20%; IEPE = Integrated Electronics Piezo Electric) |
| Current consumption [mA] | 200; (24 V) |
| Protection class | III |
| Inputs / outputs of VSE101 | |
| Total number of inputs and outputs | 16; (configurable) |
| Number of inputs and outputs | Number of digital inputs: 8; Number of analog inputs: 2; Number of dynamic inputs: 4; Number of digital outputs: 2; Number of analog outputs: 1 |
| Inputs of VSE101 | |
| Total number of inputs | 10 |
| Number of digital inputs | 8; (configurable) |
| Input circuit of digital inputs | HTL |
| Number of analog inputs | 2 |
| Analog input (current) [mA] | 4...20 |
| Resolution of analog input | 12 |
| Number of dynamic inputs | 4 |
| Dynamic input - signal | 0...10 mA / IEPE / 4...20 mA |
| Dynamic input - resolution [bit] | 16 |
| Dynamic input - frequency range [Hz] | 0,1...12000 |
| Dynamic input - sampling rate [kSamples] | 100 |
| Outputs of VSE101 | |
| Total number of outputs | 2 |
| Output signal | switching signal; analog signal |
| Electrical design | PNP |
| Number of digital outputs | 2; (configurable) |
| Output function | normally open / closed; (configurable) |
| Max. voltage drop switching output DC [V] | 2 |
| Permanent current rating of switching output DC [mA] | 100 |
| Number of analog outputs | 1; (configurable) |
| Analog current output [mA] | 0...22; (0...10 V) |
| Max. load [Ω] | 500 |
| Short-circuit protection | yes |
| Type of short-circuit protection | yes (non-latching) |
| Overload protection | yes |
| Measuring/setting range of VSE101 | |
| Frequency range [Hz] | 0.1...12000 |
| Interfaces of VSE101 | |
| Communication interface | Ethernet |
| Protocol | TCP/IP |
| Operating conditions of VSE101 | |
| Ambient temperature [°C] | 0...70 |
| Storage temperature [°C] | 0...70 |
| Protection | IP 20 |
| Tests / approvals of VSE101 | |
| EMC | EN 61000-6-2EN 61000-6-3 |
| UL approval | Ta70 °CEnclosure type1voltage supplyLimited Voltage/CurrentFile number ULE251902 |
| Mechanical data of VSE101 | |
| Weight [g] | 352.2 |
| Housing | Plastic housing |
| Type of mounting | rail; (TH35/EN60715) |
| Dimensions [mm] | 114 x 50 x 105 |
| Material | PA |
| Data memory of VSE101 | |
| History memory | yes |
| Data memory buffered | yes |
| Data memory type | ring memory; FIFO |
| Real-time clock | yes; |
| Memory location | internal |
| Memory interval | min. 1 min |
| Memory size | 881664 data records |
| Accessories of VSE101 | |
| Accessories (optional) | cross-over Ethernet patch cable for the direct connection to the PC |
| Remarks of VSE101 | |
| Pack quantity | 1 pcs. |
VSE002
Product designation
Diagnostic electronics for vibration sensors
Frequency range
0.1...12000 Hz
Communication interface
Ethernet
Protocol
TCP/IP
Operating voltage DC
24 V
VSE003
Product designation
Diagnostic electronics for vibration sensors
Frequency range
0.1...12000 Hz
Communication interface
Ethernet
Protocol
TCP/IP
Operating voltage DC 24 V
VSE100
Product designation
Diagnostic electronics for vibration sensors
Frequency range
0.1...12000 Hz
Communication interface
Ethernet
Protocol
TCP/IP
Operating voltage DC
24 V
VSE150
Product designation
Diagnostic electronics for vibration sensors
Frequency range
0.1...12000 Hz
Communication interface
Ethernet
Protocol
PROFINET IO
Operating voltage DC
24 V
VSE151
Product designation
Diagnostic electronics for vibration sensors
Frequency range
0.1...12000 Hz
Communication interface
Ethernet
Protocol
EtherNet/IP
Operating voltage DC
24 V
VSE153
Product designation
Diagnostic electronics for vibration sensors
Frequency range
0.1...12000 Hz
Communication interface
Ethernet
Protocol
Modbus TCP
Operating voltage DC
24 V
VSE903
Product designation
Diagnostic electronics for vibration sensors
Frequency range
0.1...12000 Hz
Communication interface
Ethernet
Protocol
TCP/IP
Operating voltage DC
24 V
VSE950
Product designation
Diagnostic electronics for vibration sensors
Frequency range
0...12000 Hz
Communication interface
Ethernet
Protocol
PROFINET
Operating voltage DC
24 V
VSE951
Product designation
Diagnostic electronics for vibration sensors
Frequency range
0...12000 Hz
Communication interface
Ethernet
Protocol
EtherNet/IP
Operating voltage DC
24 V
VSE953
Product designation
Diagnostic electronics for vibration sensors
Frequency range
0...12000 Hz
Communication interface
Ethernet
Protocol
Modbus TCP
Operating voltage DC
24 V
VSE101
Product designation
Diagnostic electronics for vibration sensors
Frequency range
0.1...12000 Hz
Communication interface
Ethernet
Protocol
TCP/IP
Operating voltage DC
24 V
VSE152
Product designation
Diagnostic electronics for vibration sensors
Frequency range
0.1...12000 Hz
Communication interface
Ethernet
Protocol
EtherCAT
Operating voltage DC
24 V
if you are intersted in more product, Please feel free to contct below contact me :windy@hkxytech.com
Windy Wang
HONGKONG XIEYUAN TECH CO., LIMITED
Add: 7-A16,Caishen Commercial Plaza,Hankou Railway Station,Wuhan,China
Tel: +86-27-8588 3233 | Fax:+86-27-8530 9780 | Mobile/Whatsapp :+86 15972199006 | Skype: windy@hkxytech.com
Mail: windy@hkxytech.com
Website: http://www.hkxytech.com/ | GMT/UTC +8
