ABB 3BSE076939R1 PM866AK01 Processor Unit With Good Price In Stock
The CPU board contains the microprocessor and RAM memory, a real-time clock, LED indicators, INIT push button, and a CompactFlash interface.
The base plate of the PM866 / PM866A controller has two RJ45 Ethernet ports (CN1, CN2) for connection to the Control Network, and two RJ45 serial ports (COM3, COM4). One of the serial ports (COM3) is an RS-232C port with modem control signals, whereas the other port (COM4) is isolated and used for the connection of a configuration tool. The controller supports CPU redundancy for higher availability (CPU, CEX-Bus, communication interfaces and S800 I/O).
Simple DIN rail attachment / detachment procedures, using the unique slide & lock mechanism. All base plates are provided with a unique Ethernet address which provides every CPU with a hardware identity. The address can be found on the Ethernet address label attached to the TP830 base plate.
Features and benefits
ISA Secure certified
Reliability and simple fault diagnosis procedures
Modularity, allowing for step-by-step expansion
IP20 Class protection without the requirement for enclosures
The controller can be configured with 800xA control builder
The controller has full EMC certification
Sectioned CEX-Bus using a pair of BC810 / BC820
Hardware based on standards for optimum communication connectivity (Ethernet, PROFIBUS DP, etc.)
Built-in redundant Ethernet Communication ports
- General info
Article number 3BSE076939R1 (PM866AK01) Redundancy No High Integrity No Clock Frequency 133 MHz Performance, 1000 boolean operations 0.09 ms Performance 0.09 ms Memory 64 MB RAM available for application 51.389 MB Flash memory for storage Yes - Detailed data
Processor type MPC866 Switch over time in red. conf. Max 10 ms No. of applications per controller 32 No. of programs per application 64 No. of diagrams per application 128 No. of tasks per controller 32 Number of different cycle times 32 Cycle time per application programs Down to 1 ms Flash PROM for firmware storage 4 MB Power supply 24 V DC (19.2-30 V DC) Power consumption +24 V typ/max 210 / 360 mA Power dissipation typ. 5.1 W (8.6 W max) Redundant power supply status input Yes Built-in back-up battery Lithium, 3.6 V Clock synchronization 1 ms between AC 800M controllers by CNCP protocol Event queue in controller per OPC client Up to 3000 events AC 800M transm. speed to OPC server 36-86 events/sec, 113-143 data messages/sec Comm. modules on CEX bus 12 Supply current on CEX bus Max 2.4 A I/O clusters on Modulebus with non-red. CPU 1 electrical + 7 optical I/O clusters on Modulebus with red. CPU 0 eletrical + 7 optical I/O capacity on Modulebus Max 96 (single PM866) or 84 (red. PM866) I/O modules Modulebus scan rate 0 - 100 ms (actual time depending on number of I/O modules) Supply current on Electrical Modulebus 24 V : max 1.0 A
5 V : max 1.5 AEthernet channels 2 Ethernet interface Ethernet (IEEE 802.3), 10 Mbit/s, RJ-45, female (8-pole) Control Network protocol MMS (Manufacturing Message Service) and IAC (Inter Application Communication) Recommended Control Network backbone 100 Mbit/s switched Ethernet Real-time clock stability 100 ppm (approx. 1 h/year) RS-232C interface 2 (one general, 1 for service tool) RS-232C interface (COM3) (non red. only) RS-232C, 75-19 200 baud, RJ-45 female (8-pole), not opto isolated, full RTS-CTS support RS-232C interface (COM4) (non red. only) RS-232C, 9 600 baud, RJ-45 female (8-pole), opto isolated, no RTS-CTS support - Environment and certification
- Dimensions
Width 119 mm (4.7 in.) Height 186 mm (7.3 in.) Depth 135 mm (5.3 in.) Weight (including base) 1200 g (2.6 lbs)
Windy Wang
HONGKONG XIEYUAN TECH CO., LIMITED
Add: 7-A16,Caishen Commercial Plaza,Hankou Railway Station,Wuhan,China
Tel: +86-27-8588 3233 | Fax:+86-27-8530 9780 | Mobile/Whatsapp :+86 15972199006 | Skype: windy@hkxytech.com
Mail: windy@hkxytech.com
Website: http://www.hkxytech.com/ | GMT/UTC +8
