IFM Continuous level sensor (guided wave radar) LR3000 LR0000B-BR34AMPKG/US
For the reliable level control in tanks and containers
Suitable for water, oils and coolants
Clearly visible 4-digit LED display
Modular system consisting of evaluation unit and probe
Adaptation to different container heights through shortening of the probe
| Product characteristics | |
|---|---|
| Number of inputs and outputs | Number of digital outputs: 1; Number of analogue outputs: 1 |
| Probe length L [mm] | 100...1600 |
| Process connection | G 3/4 external thread |
| Application | |
| Special feature | Gold-plated contacts |
| Media | Liquids |
| Dielectric constant of the medium | ≥ 1,8; (for media with a dielectric constant of 1.8...5 (e.g. oils), a coaxial pipe is needed for operation) |
| Recommended media | water; hydrous media; oils; oil-based media |
| Cannot be used for | See the operating instructions, chapter "Function and features". |
| Medium temperature [°C] | -25...80; (90 < 1 h) |
| Tank pressure [bar] | -1...16 |
| MAWP (for applications according to CRN) [bar] | 16 |
| Electrical data | |
| Operating voltage [V] | 18...30 DC |
| Current consumption [mA] | < 30 |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time [s] | < 3 |
| Inputs / outputs | |
| Number of inputs and outputs | Number of digital outputs: 1; Number of analogue outputs: 1 |
| Outputs | |
| Total number of outputs | 2 |
| Output signal | switching signal; analogue signal; IO-Link |
| Electrical design | PNP |
| Number of digital outputs | 1 |
| Output function | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC [V] | 2.5 |
| Permanent current rating of switching output DC [mA] | 200 |
| Number of analogue outputs | 1 |
| Analogue current output [mA] | 4...20, invertible; (scalable) |
| Max. load [Ω] | 500 |
| Analogue voltage output [V] | 0...10, invertible; (scalable) |
| Min. load resistance [Ω] | 2000 |
| Short-circuit protection | yes |
| Type of short-circuit protection | thermal, pulsed |
| Overload protection | yes |
| Measuring/setting range | |
| Probe length L [mm] | 100...1600 |
| Active range A [mm] | L-40; (when set to oil and oil based media: L-60) |
| Inactive range I1 / I2 [mm] | 30 / 10; (when set to oil and oil based media: 30 / 30) |
| Sampling rate [Hz] | 4 |
| Setting range | |
| Set point SP [mm] | ≥ 15...L-30 |
| Note on setpoint SP | when set to oil and oil based media: 35...L-30 |
| Reset point rP [mm] | ≥ 10...L-35 |
| Note on reset point rP | when set to oil and oil based media: 30...L-35 |
| In steps of [mm] | 5 |
| Hysteresis [mm] | > 5 |
| Accuracy / deviations | |
| Repeatability [mm] | ± 5 |
| Measuring error [mm] | ± 7 |
| Offset error [mm] | 5 |
| Resolution [mm] | 1 |
| Zero signal (voltage) [V] | 0 |
| Zero signal (current) [mA] | 4.0 |
| Full signal (voltage) [V] | 10 |
| Full signal (current) [mA] | 20 |
| Temperature drift per 10 K | ± 0.2 |
| Interfaces | |
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 CDV |
| Profiles | no profile |
| SIO mode | yes |
| Required master port type | A |
| Process data analogue | 1 |
| Process data binary | 1 |
| Min. process cycle time [ms] | 2.3 |
| Supported DeviceIDs | Type of operationDeviceIDDefault344 |
| Operating conditions | |
| Ambient temperature [°C] | -25...60 |
| Storage temperature [°C] | -40...80 |
| Protection | IP 67 |
| Tests / approvals | |
| EMC | DIN EN 61000-6-2DIN EN 61000-6-3in a closed metal tankDIN EN 61000-6-4in plastic or open metal tanks |
| Shock resistance | DIN EN 60068-2-2750 g (11 ms) / 25 g (6 ms) with reference rod 0.5 m |
| Vibration resistance | DIN EN 60068-2-65 g (10...2000 Hz) / 1 g (5...200 Hz) with reference rod 0.5 m |
| MTTF [years] | 196 |
| UL approval | UL Approval no.H006File number ULE174191 |
| Mechanical data | |
| Weight [g] | 437 |
| Materials | stainless steel (1.4301 / 304); stainless steel (1.4404 / 316L); FKM; PBT; PC; PEI; TPE-V |
| Materials (wetted parts) | stainless steel (1.4305 / 303); probe connection: stainless steel (1.4435 / 316L); PTFE; FKM; Sealing: NBR reinforced fibre |
| Process connection | G 3/4 external thread |
| Displays / operating elements | |
| Display | Display unit3 x LED, greenswitching status1 x LED, yellowlevelalphanumeric display, 4-digitparameter settingalphanumeric display, 4-digit |
| Remarks | |
| Notes | Please see the technical note under "Downloads" |
| Pack quantity | 1 pcs. |
| Electrical connection | |
| Connection | Connector: 1 x M12; Contacts: gold-plated |
Related Products
LR7000
LR7020
LR8020
LR3020
LR2050
LR2750
LR8000
LR9020
LR3300
LR7300
LR2350
LR8300
LR8010
LR2059
LR2759
LR3320
LR7320
LR8320
Windy Wang
HONGKONG XIEYUAN TECH CO., LIMITED
Add: 7-A16,Caishen Commercial Plaza,Hankou Railway Station,Wuhan,China
Tel: +86-27-8588 3233 | Fax:+86-27-8530 9780 | Mobile/Whatsapp :+86 15972199006 | Skype: windy@hkxytech.com
Mail: windy@hkxytech.com
Website: http://www.hkxytech.com/ | GMT/UTC +8
